Welcome to your new favorite hoodie, ladies.  This long length hoodie dress is screenprinted across the chest with the band name and embroidered on the pocket with the round Disco Biscuits logo.

Created for comfort using an exclusive Special Blend fabric and a stylish silhouette, this hoodie provides the ultimate in cozy coverage. Features include a crossover neck, thumbholes, and 2 drawcords in contrasting colors.

Size chart in additional photos.

High-quality, sublimated full-color all-over print ladies leggings.

Full length leggings with comfortable waistband.

Heavyweight black zip up hoodie.

Glow in the dark back print art

Design by Christian Jaxheimer.

This 6″ Snowboard Stomp pad protect assists riders when getting off of chair lifts. Mounted between the bindings, stomp pads are used to secure the rear foot when getting off of a chair lift at the top of the mountain. All pads come with high performance adhesive for secure mounting to the board by the recipient. Logo is protected under the clear material of the pad, which provides traction for keeping the rear foot in position.

INSTALLATION INSTRUCTIONS:

You want to install your stomp pad as close to your back binding as you can – this will make it feel as close to your normal stance as you can make it. And it will also mean that you can lean your boot against the binding for extra stability.

Make sure that you position the stomp pad on the inside of the back binding.

Here’s how to find the best spot for your stomp pad.

1. Place your snowboard on the ground and put your boots on
2. Place your back foot on the snowboard on the inside of the back binding, close to the back binding so that you are still standing upright and so that the side of your boot is touching the side of the binding
3. Mark the points on the board where the inside and outside of your boots touch the board
4. When you place your stomp pad it should be inside these tape marks (or at least not outside the tape mark that’s next to the binding)

Installing the stomp pad

Now you have the position of your stomp pad it’s time to install it/them

1. Thoroughly clean and dry the area of your board where you will be placing the stomp pad/s. If you try to attach them to a dusty, unclean or wet surface they may lose their stick quickly
2. To ensure the best possible stick make sure that you are in a warm room or heat up the boards surface with a hair dryer
3. Remove the backing to expose the adhesive and place on your stomp pad.
4. Then remove the other side of adhesive and place the stomp pad in the position you marked earlier. Press down as hard as possible and hold the pad in place for a while.
5. Let the adhesive dry for 24 hours.

1/4″ thick acrylic magnet with full color design

Design by Christian Jaxheimer

Sublimated fabric mini tapestry with grommets in corners. Measures 30″ x 30″.

Art by Christian Jaxheimer – First Earth

Above the Waves logo design by Zack Katz

Screenprinted across the front of navy/baby blue ladies fit baby rib raglan baseball tees with 3/4 length sleeves

Garment is 100% cotton. Size chart in inches:

Colorful hot air balloon design logo screenprinted in full with additional print on the back featuring band name.

Design by Dima Yastronaut.

100% cotton shirt is hand dyes in shades of blue, purple, green and yellow

Robot design by Mark Serlo, screenprinted in full color on the front of steel gray unisex t-shirts. See size chart in additional photos.

Navy blue long sleeve thermal tee with contrast stitching and embroidered logo front left chest.

Size chart, in inches, with garment laid flat:

High quality, pro style football practice jersey, totally customized for the Disco Biscuits. Front and back of this black jersey both feature the large number 42. Front includes Biscuits sports style logos, back includes the player name SPACEBIRD, and arms feature an eagle head with Biscuits logos for eyes.

Product runs small (somewhat short in waist like a practice jersey).

Gorgeous colorful logo illustrated by Caleb Williams and screenprinted on navy blue pre-shrunk unisex t-shirts.

See size chart in additional photos.

Uncivilized Area album art screenprinted in full color on the front of navy blue tees, with additional back print of Disco Biscuits logo and band name.

See size chart in additional photos.

Ladies relaxed, drapey fit side-slit tank is screenprinted in full color across the front

Art by Stacey Ratcliff

Size chart in inches:

Soft, special blend midweight zip-up charcoal hoodies with matching drawstrings. Embroidered on the front left chest with a color written band logo, and screenprinted in full color on the back with a large round logo illustrated with a colorful circuits design by John Warner Studios.

See size chart in additional photos.

Garment specs:

• 8oz (270 gm) 52% cotton/48% polyester blend fleece
• ring spun cotton
• raglan sleeves
• 1 x 1 ribbing at cuffs and waistband
• sewn eyelets
• antique nickel zipper
• slim unisex fit